Error 304 while updating firmware

Error 304 while updating firmware2018-04-28T08:38:32-07:00

Home Forums Support Bluetooth Connections Error 304 while updating firmware

Viewing 1 reply thread
  • Author
    Posts
    • rguttoschrguttosch
      Participant
      Post count: 63

      Here is a remedy for error 304 while updating firmware:

      From the POWER OFF state, press and hold the meter’s power button for 10 seconds – until the LEDs blink magenta briefly, indicating the meter’s bonding state has been reset. The LEDs will then start blinking blue, waiting for a connection.

      Reconnect to the meter, then re-establish the bonding (pairing), and try the update again.

      • This topic was modified 1 year, 7 months ago by rguttoschrguttosch.
    • Romano_SopranoRomano_Soprano
      Participant
      Post count: 1

      Hello.
      How to process firmware update?
      The current version is 720. I’m trying to update using Ipad mini4.
      It freezes on Enable DFU Mode.

      • rguttoschrguttosch
        Participant
        Post count: 63

        Romano – with firmware version 720, your meter will need to be returned to update it. I will send you a pm about it.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.